Timken Part Number X32014X, Tapered Roller Bearings - Single Cones - Metric

TIMKEN tapered roller bearing

Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces.

The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, with no sliding motion between the raceways and the OD of the rollers.

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

A outer ring, different from the basic model of the outer diameter / the basic model with different radius / different width from the basic model.

C stamping steel retainer

Special rotation precision of C08

C1 radial clearance is less than C2

The radial clearance of C2 is less than that of the ordinary group (CN)

The radial clearance of C3 is greater than that of the ordinary group (CN)

C4 radial clearance is greater than C3

C5 radial clearance is greater than C4

CA inner ring machine machining brass holistic cage

Internal design of E optimization

F large steel cage